Daimler and Paccar recall 4,832 model-year 2027 trucks over a driveshaft that can separate
Certain Cummins-Meritor drivelines may be missing a snap ring in the slip yoke assembly, letting a bearing cup separate from the driveline — Daimler is recalling 3,894 Freightliner and Western Star trucks and Paccar 938 Kenworths, with free inspection and replacement and owner letters due in January. A separate Daimler label recall covers just seven trucks.
Summarized from Overdrive.
Image: Illustration: AI-generated by CDLWire
A driveshaft defect in certain Cummins-Meritor drivelines has prompted Daimler Trucks North America and Paccar to recall a combined 4,832 model-year 2027 trucks, according to Overdrive on Nov. 16. Recall documents from both manufacturers say the drivelines may be missing a snap ring in the slip yoke assembly, causing the bearing cup to separate from the driveline. A driveline separation can cause a loss of drive power, and detached components can become a road hazard for other vehicles, National Highway Traffic Safety Administration documents state. Every truck in both campaigns is a model-year 2027 unit — the newest equipment either manufacturer sells.
Daimler’s recall is the larger of the two, covering 3,894 trucks: the 2027 Western Star 49X and 47X, the 2027 Freightliner Cascadia Fifth Gen and Cascadia, and the 2027 Freightliner 114SD, Business Class M2 and 108SD. For owners of affected Freightliner and Western Star trucks, Cummins will inspect and replace the driveline as necessary, free of charge. Owner notification letters are expected to be mailed Jan. 5, 2027. Owners can contact Daimler Trucks North America customer service at 800-547-0712 or Cummins customer service at 800-286-6467. Daimler’s number for this recall is F1046, and NHTSA’s recall number is 26V-737.
Paccar’s recall covers 938 model-year 2027 Kenworth T280, T380, T680, T880 and W990 trucks built with the same Cummins-Meritor driveline. For affected Kenworth owners, dealers will inspect and replace the driveline as necessary, free of charge. Owner notification letters are expected to be mailed Jan. 10, 2027. Owners may contact Kenworth customer service at 425-828-5888 with recall number 26PACK. NHTSA’s recall number for the Paccar campaign is 26V-743.
A separate Daimler recall in the same documents affects just seven power units, and the defect is on paper rather than in the driveline: the Gross Axle Weight Rating (GAWR) listed on the Federal Certification Label is incorrect, which could allow the vehicle to be overloaded. With the incorrect label, the affected trucks fail to comply with the requirements of 49 CFR Part 567, “Certification.” The recall includes certain 2020 Western Star 4900, 2024 Freightliner Cascadia, and 2027 Western Star 49X trucks. Recall documents state that in or around late October 2026, Daimler became aware through a phone call from a dealer that an 8x4 vehicle appeared to have an incorrect GAWR load rating on its certification label; on Oct. 30 the company opened a case to investigate, confirmed that its database does not match the intended GAWR on seven vehicles, and on Nov. 4, 2026, voluntarily recalled them. Daimler says it is not aware of any warranty claims, field reports, or safety-related outcomes pertaining to this issue. The remedy is currently under development, and owner notification letters are expected to be mailed Jan. 5, 2027. Owners can contact Daimler customer service at 1-800-547-0712 with recall number F1045; NHTSA’s recall number is 26V-736.
The driveshaft campaigns are the second Cummins-component recall wave to reach late-model trucks in this fall’s coverage. On Oct. 28, CDLWire reported two Paccar recalls in one day: nearly 27,000 Kenworth and Peterbilt trucks over a Cummins L9 fuel hose, plus about 310 model-year 2027 sleepers over bunk restraints. The driveshaft recalls are smaller, but the failure mode is less forgiving than a label error or a fuel smell: a bearing cup that separates from the driveline can take the driveline with it, leaving the truck without drive power and putting detached hardware on the roadway in front of following traffic. That is the sequence the recall documents themselves describe, and it is why a missing snap ring — a small retaining part inside the slip yoke assembly — is enough to pull 4,832 new trucks into two campaigns.
The practical step does not have to wait for the January letters. If you own or operate one of the listed model-year 2027 trucks — a Freightliner Cascadia, Cascadia Fifth Gen, 114SD, Business Class M2 or 108SD, a Western Star 49X or 47X, or a Kenworth T280, T380, T680, T880 or W990 — check the truck’s VIN against NHTSA campaigns 26V-737 and 26V-743 now, and against 26V-736 for the seven-truck label recall. The inspection, and replacement of the driveline where the snap ring is missing, are free of charge under both driveshaft campaigns. Fleets taking delivery of 2027 trucks this quarter have the cleanest version of the same check: confirm the campaign status before the truck is put in service, rather than after a driveline problem introduces it.



Comments
Loading comments…